Ceyear Test & Measurement Equipment


Ceyear offer a wide range of high-tech electronic test & measurement solutions up to 500 GHz. Their comprehensive product range includes signal generators, signal analysers, network analysers, power meters and microwave components.

Test Solutions up to 500 GHz

Test Solutions up to 500 GHz

Ceyear offer a wide range of high-tech electronic test & measurement solutions up to 500 GHz.

About Ceyear

Ceyear specialises in the research and development of electronic measurement instruments, automatic testing systems, microwave and millimeter components and other electronic products. As an official UK distributor for Ceyear, MCS Test has the knowledge and experience to advise you on the full range of their test equipment solutions.

Ceyear Products

category.title

RF Power Amplifiers

A power amplifier is an electronic device used to increase the magnitude of voltage/current/power of an input signal. It takes in a weak electrical signal/waveform and reproduces a similar stronger waveform at the output by using an external power source.

View products in RF Power Amplifiers
category.title

Fibre Cleavers

A cleaver is a mechanical precision device whose task is to cleave the end of an optical fibre so that the cleavage surface was as flat as possible and if possible at 90° angle to the fibre itself.

View products in Fibre Cleavers
category.title

Fibre Optic Combined Testers & Kits

Fibre optic test equipment is a device used specifically in testing and running diagnostics with regards to any fibre optic wiring or device receiving a signal from one.

View products in Fibre Optic Combined Testers & Kits
category.title

Fusion Splicers

Fusion splicing is the act of joining two optical fibers end-to-end. The goal is to fuse the two fibers together in such a way that light passing through the fibers is not scattered or reflected back by the splice, and so that the splice and the region surrounding it are almost as strong as the intact fiber.

View products in Fusion Splicers
category.title

OTDR

An optical time-domain reflectometer is an optoelectronic instrument used to characterise an optical fiber. An OTDR is the optical equivalent of an electronic time domain reflectometer.

View products in OTDR
category.title

Optical Attenuators

An optical attenuator, or fibre optic attenuator, is a device used to reduce the power level of an optical signal, either in free space or in an optical fiber. The basic types of optical attenuators are fixed, step-wise variable, and continuously variable.

View products in Optical Attenuators
category.title

Optical Light Sources

A fibre light source is used to inject light into a fibre optic cable for the purpose of testing it. They come in two basic varieties: light emitting diodes (LEDs) and laser diodes. They’re further differentiated by the wavelength they produce and the type of cable they test.

View products in Optical Light Sources
category.title

Visual Fault Locators

A visual fault identifier or visual fault locator (VFI / VFL) is a visible red laser designed to inject visible light energy into a fiber. Sharp bends, breaks, faulty connectors and other faults will “leak” red light allowing technicians to visually spot the defects.

View products in Visual Fault Locators
category.title

Digital Oscilloscopes

A digital oscilloscope is a complex electronic device composed of various software and electronic hardware modules that work together to capture, process, display and store data that represents the signals of interest of an operator.

View products in Digital Oscilloscopes
category.title

Power Meters

RF power meters measure the strength of radio frequency signals in dBm or watts. They are also referred to as RF wattmeters. Their ultimate objective is to calculate transmitter output.

View products in Power Meters
category.title

Power Sensors

An RF power meter is an instrument, which can measure the electrical power mostly in the range of 100 MHz to 40 GHz. This meter consists of an RF power sensor that is connected to it via a cable and can display power reading.

View products in Power Sensors
category.title

Network Analysers

A Network Analyser is an instrument that measures the network parameters of electrical networks. Today, network analysers commonly measure s–parameters because reflection and transmission of electrical networks are easy to measure at high frequencies.

View products in Network Analysers
category.title

Network Analyser Extension Modules

Network analyser extension modules provide frequency extension from 50 GHz up to 500 GHz , with high port test power, large dynamic range and high system stability. It is simple in structure and is easy to use, which can be compatible with most network analysers in the market.

View products in Network Analyser Extension Modules
category.title

Noise Figure Analysers

Noise testers operate through a programmable noise generator that is designed to supply a high level of white Gaussian noise. Some noise testers can be operated manually by way of panel controls: others can be managed remotely via a controller.

View products in Noise Figure Analysers
category.title

Signal Analysers

A signal analyser is an instrument that measures the magnitude and phase of the input signal at a single frequency within the IF bandwidth of the instrument. It employs digital techniques to extract useful information that is carried by an electrical signal.

View products in Signal Analysers
category.title

Spectrum Analysers

A spectrum analyzer measures the magnitude of an input signal versus frequency within the full frequency range of the instrument. The primary use is to measure the power of the spectrum of known and unknown signals.

View products in Spectrum Analysers
category.title

Signal / Spectrum Analyser Extension Modules

The spectrum /signal analyser extension modules provide frequency extension from 50 GHz to 325 GHz, and adopts the mode of the local oscillator frequency-doubled driving balanced mixer or sub-harmonic mixer.

View products in Signal / Spectrum Analyser Extension Modules
category.title

Signal Generators

A Signal Generator is an electronic device that generates repeating or non-repeating electronic signals in either the analog or the digital domain. These generated signals are used as a stimulus for electronic measurements.

View products in Signal Generators
category.title

Signal Generator Extension Modules

Signal Generator Extension Modules are used to extend the frequency range of your signal generators with an extension range from 50 - 500 GHz.

View products in Signal Generator Extension Modules
category.title

Calibration Kits

A calibration kit contains a set of physical devices called standards. Each standard has a precisely known or predictable magnitude and phase response as a function of frequency.

View products in Calibration Kits
category.title

Coaxial Adaptors

A coaxial RF connector (radio frequency connector) is an electrical connector designed to work at radio frequencies in the multi-megahertz range. RF connectors are typically used with coaxial cables and are designed to maintain the shielding that the coaxial design offers.

View products in Coaxial Adaptors

Finance Your Ceyear Test Equipment

Renting your Ceyear equipment from MCS enables you to obtain the equipment you need now, without needing to rely on capital budget, compromise on quality, or spread the acquisition of multiple items over a number of years. We have a number of flexible finance packages available:


block.blockTitleOne

Rent to Buy

  • Spread payments up to five years
  • treat payments as operating expenses
  • rental payments count towards purchase
block.blockTitleOne

Flexible Finance

  • 0% finance options available
  • Up to 60 months
  • Available on all equipment
block.blockTitleOne

Operating Lease

  • Low rate for committed term
  • Low payments each month
  • Available on all equipment

Related Ceyear News

Ceyear Electronic Measurement Conference Grandly Held in Qingdao

Ceyear Electronic Measurement Conference Grandly Held in Qingdao

On September 11, 2018 Ceyear Electronic Measurement Conference was grandly held in Qingdao, which was organized by Ceyear to celebrate the 50th anniversary of the 41st Institute of China Electronics Technology Group Corporation.

Find out more about Ceyear Electronic Measurement Conference Grandly Held in Qingdao
Ceyear in Convergence India 2020 Exhibition

Ceyear in Convergence India 2020 Exhibition

Ceyear will attend 28th Convergence India 2020 Exhibition which is dated 19-21 February 2020.

Find out more about Ceyear in Convergence India 2020 Exhibition

Sign up for the MCS Newsletter

You will receive all the latest test & measurement news and rental offers.