Antenna Towers

3 RF Safety Measures for Tower Climbers

Published: 16th November 2021

Tower climbers have one of the most dangerous professions in the world, predominantly due to the risks associated with falling. However, those who work on structures that are situated near RF-emitting devices such as broadcast, and telecommunications antennas have the added risk of RF radiation overexposure. Although not considered medically significant at low levels, RF radiation can pose a health risk, particularly when multiple sources are present, and the cumulative levels exceed prescribed safety limits. Furthermore, the closer a worker gets to an antenna and the longer they remain in the RF radiation field, the greater the impact on their body. There are, however, steps that tower climbers can take to maintain safety at all times:

1. Completing the relevant training
2. There’s no “I” in team
3. Being equipped with the right PPE

Let’s first consider what RF (Radio Frequency) radiation is. RF radiation is the propagation of energy in the form of radio waves, which are a subset of the electromagnetic spectrum. It travels at the speed of light and is extensively used in broadcast radio, television and telecommunications systems. The known negative side-effects of RF overexposure are whole body and localized heating, and because of this it is important that workers are not exposed to levels exceeding the guidelines set down by the authorities.

Tower climbers should be trained in the use of calibrated personal RF monitoring devices such as one from the FieldSENSE range of Personal RF Monitors and then wear it when working around or on a tower with active transmitters. Over and above this there are a number of steps that can be taken to limit the risk of RF overexposure listed below.

1. Completing the relevant training

Armed with the insight into the risks associated, a trained professional should perform a risk assessment and prepare a plan prior to the work commencing. This will include:

  • Establishing if work permits are required,
  • notifying carriers who use the tower’s antennas of the work to be performed,
  • where necessary, arranging to reduce RF emissions during the work,
  • identifying the climbing equipment that will be needed,
  • assessing the soundness and validity of the structure and all anchor points,
  • how to execute any and all lockout/tagout procedures specific to the site, and on the day weather and other conditions that may affect workers as weather on the ground may be vastly different to up a tower.

2. There’s no “I” in team

Building, climbing, and repairing cell towers is more than a one-person job. Teams working together need to adhere to the climb plan and conduct their work in compliance with the pre-approved plan. Staying in close contact with each other – through the use of 2-way radios for instance – helps to ensure everybody on the team is fully aware of the situation each member is facing, and should an unexpected event arise, immediate corrective action can be taken if required.

Knowing the RF environment that work is to take place in is integral to safe working, and more so when working at heights as RF overexposure can lead to dehydration, heat stress or in extreme conditions heat stroke. It is the responsibility of the team leader and each team member to know the overall plan and procedures, as they may be incapacitated and rely on everyone knowing this for a rescue at height.

3. Being equipped with the right PPE

Work in environments where RF exposure levels are expected to exceed the safe working limits mandate the use of appropriate PPE (Personal Protective Equipment). Personal RF Monitors like those in the FieldSENSE range are especially designed to protect workers from RF overexposure by giving a timely warning of the presence of RF in their vicinity. These devices are specifically designed to not be a hindrance while performing the work at hand.

The human body can work like an antenna in certain conditions. Personal RF Monitors are attached to the climber’s harness and continuously measure the amount of RF in the surrounding atmosphere. As RF is not visible to the naked eye a suitable monitor becomes the eyes of the worker, helping to keep them safe.

MCS Test are an approved UK partner for FieldSENSE
Content Source: Three RF Safety Measures For Tower Climbers – fieldSENSE


FieldSENSE 2.0 Personal RF Monitor

Discounts available on orders of more than 10

The FieldSENSE 2.0 is the next generation in Personal RF Monitors specifically designed for protecting personnel working near broadcast and telecommunications transmitting antennas from EMF overexposure.

Find out more about FieldSENSE 2.0 Personal RF Monitor

FieldSENSE 60 Personal RF Monitor

Discounts available on orders of more than 10

The FieldSENSE 60 is specifically designed with the RF climber in mind – whether working in the near-field of a broadcast system or in the far-field of a 5G system, exposure is correctly assessed and a warning is sounded, should the levels approach and exceed the occupational limits

Find out more about FieldSENSE 60 Personal RF Monitor

You Might also like

Field SENSE 2 0 Personal RF Monitor in use

5 Factors to Consider When Choosing a Personal RF Monitor

The use of personal radio frequency (RF) monitors is legislated for wireless tower climbers, bucket truck workers and technicians and the like. Safety managers require all personnel working on wireless facilities to carry RF monitors as part of their personal protective equipment. Stringent global health and safety policies for RF exposure levels further contributed to companies looking to monitor these levels to protect their employees.

Read more
Waiter hand holding an empty digital tablet with smart city and 5 G network wireless systems

What are the Requirement for the Rapid Roll-Out of 5G?

Rolling out 5G technology is a key enabler for both mobile broadband developments and new use cases in mobile networks. Furthermore, cloud-based cores will power 5G networks and allow physical functions to be virtualised and moved around the network. Software upgrades will simplify rolling out new features, while edge computing will facilitate ultra-low latency.

Read more
Fieldsense 2.0 RF Monitor

Strong Just Got Stronger: FieldSENSE Personal RF Monitor Most Robust Product on the Market

Robustness and resistance to adverse conditions have been key features of the fieldSENSE personal RF monitor since its inception. Dust, water, heat and cold are no match to its durability. But that is not all: as of now, the fieldSENSE personal RF monitor is the most robust product in its field on the market having just been rated IK 08 as per the EN 62262 standard.

Read more

Sign up for the MCS Newsletter

You will receive all the latest test & measurement news and rental offers.