New FSVA Signal & Spectrum Analyser from Rohde & Schwarz

New FSVA Signal & Spectrum Analyser from Rohde & Schwarz

Published: 14th June 2016

Rohde & Schwarz have introduced the FSVA, an enhanced midrange signal and spectrum analyser for signal analysis and demodulation up to millimeterwave frequencies.

The new R&S FSVA offers a 160 MHz analysis bandwidth over its entire frequency range, making it the only analyser in its class to do so at frequencies between 26.5 GHz and 40 GHz. With its enhanced phase noise performance, the FSVA offers you very high accuracy in spectral measurements on narrowband modulated signals and in phase noise measurements.

Advanced features include:

  • improved phase noise of typ. –117 dBc at 1 GHz with 10 kHz offset
  • improved third order intercept (TOI) for frequencies lower than 7 GHz, for a higher dynamic range.

As a result, the FSVA offers enhanced spectrum measurements compared with the current R&S FSV family, e.g. spectrum emission mask and ACLR under higher power conditions. The sensitivity of the preamplifier of typ. –166 dBm for frequencies lower than 7 GHz has also been improved.

Like the R&S FSV, the FSVA is available in five models, covering frequency ranges from 10 Hz to 4 GHz, 7 GHz, 13.6 GHz, 30 GHz and 40 GHz:

  • FSVA4
  • FSVA7
  • FSVA13
  • FSVA30
  • FSVA40

The FSVA supports all FSV hardware functions and firmware options. Plus, the R&S FSV and the R&S FSVA are fully remote control compatible for use in complex test setups.

You Might also like

IFR6000 Training Video 2

IFR6000 Transponder/DME/TCAS Flight Line Test Set Training Videos.

Check out the latest training video for the IFR6000 Transponder/DME/TCAS Flight Line Test Set from Viavi

Read more
25 year old SESD 200 successfully calibrated

25 year old SESD 200 successfully calibrated

At the beginning of calendar year 2020, an old model of the "SESD 200" series successfully passed Schlöder's factory calibration in accordance with the IEC 61000-4-2 standard.

Read more
Wi-Fi 6 and 6E Testing with IQxel-MW 7G

Wi-Fi 6 and 6E Testing with IQxel-MW 7G

In the following video, you will see LitePoint’s IQxel-MW 7G, the first fully integrated tester to support Wi-Fi testing in the 2.4 and 5 GHz and 6 GHz bands.

Read more

Sign up for the MCS Newsletter

You will receive all the latest test & measurement news and rental offers.