Trade in your old scope for a new one

Trade in your old scope for a new one!

Published: 30th December 2020

See what your scope is worth.

Tektronix are offering the chance for customers to get a great discount on a new 5 Series MSO or 6 Series MSO oscilloscope.

For a limited time, you can trade in a qualifying used oscilloscope to receive a discount on a new 5 or 6 Series MSO scope*.

Don't just take our word for it. When we asked Stefan Grönbeck, engineer at Siemens, about his thoughts on the 8 FlexChannels™ and using the industry's largest HD display he said;

"Very helpful. I monitor the rise of various power supplies of a processor in overlay mode, with all voltages aligned to a common zero Volt line. So I can track the correct operation throughout power up or power down, according to the specification."

To learn more about the 5 and 6 Series MSO visit the Tektronix comparison page.

category.title

Tektronix MSO54 350 MHz - 2 GHz Mixed Signal Oscilloscope

Frequency Range: 350 MHz - 2 GHz
4 Analog Channels, 32 Digital Channels (OPT)

Up to 30% savings!

For a limited time, you can trade in a qualifying used oscilloscope to receive a discount on a new 5 or 6 Series MSO scope! Find out more

Find out more about Tektronix MSO54 350 MHz - 2 GHz Mixed Signal Oscilloscope
category.title

Tektronix MSO56 350 MHz - 2 GHz Mixed Signal Oscilloscope

Frequency Range: 350 MHz - 2 GHz
6 Analog Channels, 48 Digital Channels (OPT)

Up to 30% savings!

For a limited time, you can trade in a qualifying used oscilloscope to receive a discount on a new 5 or 6 Series MSO scope! Find out more

Find out more about Tektronix MSO56 350 MHz - 2 GHz Mixed Signal Oscilloscope
category.title

Tektronix MSO58 350 MHz - 2 GHz Mixed Signal Oscilloscope

Frequency Range: 350 MHz - 2 GHz
8 Analog Channels, 64 Analog Channels (OPT)

The MSO58 is an integral component in power supply measurement, design, and analysis.

Find out more about Tektronix MSO58 350 MHz - 2 GHz Mixed Signal Oscilloscope
category.title

Tektronix MSO64B 1 - 10 GHz Mixed Signal Oscilloscope

Frequency Range: 1 - 10 GHz
4 Analog Channels, 32 Digital Channels (OPT)

The MSO64 provides the best signal fidelity for analyzing and debugging today's embedded systems with GHz clock and bus speeds.

Find out more about Tektronix MSO64B 1 - 10 GHz Mixed Signal Oscilloscope
category.title

Tektronix MSO64 8 GHz Mixed Signal Oscilloscope

Frequency Range: 8 GHz
4 Analog Channels, 32 Digital Channels (OPT)

The MSO64 provides the best signal fidelity for analyzing and debugging today's embedded systems with GHz clock and bus speeds.

Find out more about Tektronix MSO64 8 GHz Mixed Signal Oscilloscope
category.title

Tektronix MSO66B 1 - 10 GHz Mixed Signal Oscilloscope

Frequency Range: 1 - 10 GHz
4 Analog Channels, 48 Digital Channels (OPT)

Up to 30% savings!

For a limited time, you can trade in a qualifying used oscilloscope to receive a discount on a new 5 or 6 Series MSO scope! Find out more

Find out more about Tektronix MSO66B 1 - 10 GHz Mixed Signal Oscilloscope
category.title

Tektronix MSO68B 1 - 10 GHz Mixed Signal Oscilloscope

Frequency Range: 1 - 10 GHz
8 Analog Channels, 64 Digital Channels (OPT)

Up to 30% savings!

For a limited time, you can trade in a qualifying used oscilloscope to receive a discount on a new 5 or 6 Series MSO scope! Find out more

Find out more about Tektronix MSO68B 1 - 10 GHz Mixed Signal Oscilloscope

You Might also like

Bode Plots on oscilloscope

Measuring the Control Loop Response of a Power Supply with an Oscilloscope

Power supplies and voltage regulators are typically designed to maintain a constant voltage over a particular current range. The supply should respond quickly to demand changes while maintaining a constant output, without excessive ringing or oscillation. To do this, power supplies are essentially amplifiers with a closed feedback loop.

Read more
Histogram View

Touchscreen User Interface for Keithley Instruments

Keithley’s Touch, Test, Invent® touchscreen products feature the same look and feel thanks to their UI, referred to as the TTI interface. This custom interface, developed by Keithley engineers, makes it incredibly simple to use the instruments and analyze data right in the box.

Read more
Tektronix Oscilloscopes

How to Get the Most Out of Your Oscilloscope

There are two ways to set up modern oscilloscopes. One is using the Autoset button, which will automatically set up your oscilloscope at just the press of a button. However, it provides no understanding of how to optimize each setting on the scope.

Read more

Sign up for the MCS Newsletter

You will receive all the latest test & measurement news and rental offers.