Vaunix releases new high resolution, easily programmable digital attenuator

Vaunix releases new high resolution, easily programmable digital attenuator

Published: 14th June 2018

The LDA-906V Lab Brick Digital Attenuator is a highly accurate 50-ohm step attenuator, capable of bidirectional fixed attenuation, swept attenuation ramps, and fading profiles.

It provides calibrated attenuation from 200 to 6,000 MHz with an impressive step size of 0.1 dB, and typical accuracy <0.25 dB over 90 dB of control range.

The LDA-906V is ideal for testing WiMAX, MIMO, SIMO, 3G, 4G, 5G, LTE, DVB, and microwave radio systems, and for creating fading and other wireless system simulations.

Lab Bricks use a native USB HID-class, driverless interface to avoid the difficulties in using older serial or IEEE-488 interfaces implemented over USB.

As a result, Lab Brick users can get to work faster without having to install kernel-level drivers.

Lab Brick devices and equipment can be easily used on any system that supports USB HID devices, including low-cost embedded computers using Windows, Linux or similar operating systems.

category.title

Vaunix LDA Attenuators Series

Frequency Range: Configurations Available up to 20 GHz

Vaunix Lab Brick LDA series RF/microwave portable and programmable digital attenuators include several 50 Ohm and 75 Ohm bi-directional step attenuators with calibrated operation in bands up to 20 GHz.

Find out more about Vaunix LDA Attenuators Series

You Might also like

25 year old SESD 200 successfully calibrated

25 year old SESD 200 successfully calibrated

At the beginning of calendar year 2020, an old model of the "SESD 200" series successfully passed Schlöder's factory calibration in accordance with the IEC 61000-4-2 standard.

Read more
Wi-Fi 6 and 6E Testing with IQxel-MW 7G

Wi-Fi 6 and 6E Testing with IQxel-MW 7G

In the following video, you will see LitePoint’s IQxel-MW 7G, the first fully integrated tester to support Wi-Fi testing in the 2.4 and 5 GHz and 6 GHz bands.

Read more
ADS B Avionics

The EASA ADS-B Mandate

The upcoming EASA Mandate states aircraft weighing over 5,700KG or with a max cruise speed greater than 250 Knots needs a Transponder with ADS-B Out capabilities.

Read more

Sign up for the MCS Newsletter

You will receive all the latest test & measurement news and rental offers.