Rf filters

What is Radio Frequency (RF) Radiation?

Published: 16th November 2021

Wireless communication has grown exponentially over the past three decades and the rate of growth is still on the increase. The cause and result of this exponential growth is more communication devices, which require more radio towers and often rooftops of buildings house multiple antennas to supply the demand of, for example, mobile phones and wireless fibre to mention only two.

Antennas that emit RF radiation are par for the course in the daily duties of roof-top technicians, bucket truck workers and tower climbers and it is therefore necessary to avoid RF overexposure.

In this article we look at:

1. What is radiofrequency (RF) radiation?
2. Is RF the same as radioactive/ionizing radiation?
3. Why limit exposure?

1. What is radiofrequency (RF) radiation?

While falls at height are the obvious hazard to tower climbers, unmonitored RF radiation exposure can pose dangers as well. As such, radio frequency safety is a vital concern for service providers who work in close vicinity to base station antennas. By understanding the RF safety and safety procedures, RF trained rooftop workers and tower climbers can consistently and reliably protect themselves from RF overexposure.

RF radiation is a form of electromagnetic radiation (energy) that moves at the speed of light and is used in just about every wireless device. It entails transferring energy in the form of radio waves from a source to a receiver and vice versa. Electromagnetic waves can cause molecules to vibrate resulting in a thermal, or heating effect which is essentially the same process as heating food in a microwave, though this takes place at much higher power levels.

2. Is RF the same as radioactive/ionizing radiation?

The electromagnetic spectrum is typically split into non-ionizing and ionizing radiation. Non-ionizing radiation has insufficient energy to remove electrons from atoms or molecules, however at high intensities it can cause tissue heating, potentially resulting in cell damage. RF radiation falls into this group with frequencies usually ranging between 30 kHz and 300 GHz. In contrast, ionizing radiation is at a much higher frequency and energy level and can cause damage on a cellular level, and as such is considered carcinogenic in sufficiently high doses.

3. Why should you limit exposure?

The level of exposure and how you can protect yourself depends on the source and your distance from it. It’s therefore important to understand how RF works, and how to avoid overexposure. In this regard, the International Commission on Non-Ionizing Radiation Protection, the National Council on Radiation Protection and Measurements and the EU Directive all stipulate exposure levels below that which could cause harm with an additional safety factor to account for any scientific uncertainties. Exposure to very high levels of RF radiation can be harmful to the extent that RF energy can rapidly heat biological tissue and increase body temperature. Soft tissue, such as the eyes, are particularly vulnerable to RF heating.

Overexposure to any type of radiation is a cause for concern but if you complete the required training, adhere to the allowed levels of exposure and take the necessary precautions, you can safely navigate your work environment without any RF radiation-related health risks.

MCS Test are an approved UK partner for FieldSENSE
Content Source: What Is RF Radiation And Why Limit Overexposure? – fieldSENSE

category.title

FieldSENSE 60 Personal RF Monitor

Discounts available on orders of more than 10

The FieldSENSE 60 is specifically designed with the RF climber in mind – whether working in the near-field of a broadcast system or in the far-field of a 5G system, exposure is correctly assessed and a warning is sounded, should the levels approach and exceed the occupational limits

Find out more about FieldSENSE 60 Personal RF Monitor
category.title

FieldSENSE 2.0 Personal RF Monitor

Discounts available on orders of more than 10

The FieldSENSE 2.0 is the next generation in Personal RF Monitors specifically designed for protecting personnel working near broadcast and telecommunications transmitting antennas from EMF overexposure.

Find out more about FieldSENSE 2.0 Personal RF Monitor

You Might also like

Field SENSE 2 0 Personal RF Monitor in use

5 Factors to Consider When Choosing a Personal RF Monitor

The use of personal radio frequency (RF) monitors is legislated for wireless tower climbers, bucket truck workers and technicians and the like. Safety managers require all personnel working on wireless facilities to carry RF monitors as part of their personal protective equipment. Stringent global health and safety policies for RF exposure levels further contributed to companies looking to monitor these levels to protect their employees.

Read more
Waiter hand holding an empty digital tablet with smart city and 5 G network wireless systems

What are the Requirement for the Rapid Roll-Out of 5G?

Rolling out 5G technology is a key enabler for both mobile broadband developments and new use cases in mobile networks. Furthermore, cloud-based cores will power 5G networks and allow physical functions to be virtualised and moved around the network. Software upgrades will simplify rolling out new features, while edge computing will facilitate ultra-low latency.

Read more
Fieldsense 2.0 RF Monitor

Strong Just Got Stronger: FieldSENSE Personal RF Monitor Most Robust Product on the Market

Robustness and resistance to adverse conditions have been key features of the fieldSENSE personal RF monitor since its inception. Dust, water, heat and cold are no match to its durability. But that is not all: as of now, the fieldSENSE personal RF monitor is the most robust product in its field on the market having just been rated IK 08 as per the EN 62262 standard.

Read more

Sign up for the MCS Newsletter

You will receive all the latest test & measurement news and rental offers.