Rohde & Schwarz CMW270 Wireless Connectivity Tester

LitePoint IQxel-M

The Litepoint IQxel-M enables testing of connectivity standards including; Wi-Fi, 802.11a/b/g/j/n/p/ah/ac, Bluetooth, Zigbee, DECT, LTE, GPS, GLONASS, COMPASS, Galileo, FM, DAB, CMMB, ISDB.

LitePoint IQxel-M8 High-volume Wireless Connectivity Test System

The Litepoint IQxel-M8 High-volume Wireless Connectivity Test System enables testing of connectivity standards including; 802.11, MIMO testing, Bluetooth, ZigBee, and DECT.

LitePoint IQxel-80/160 Wireless Connectivity Test System

The Litepoint IQxel-80/160 Wireless Connectivity Test System enables testing of connectivity standards including; WLAN, Bluetooth, ZigBee and DECT Testing.

Tescom TC-3000C Bluetooth Tester

The Tescom TC-3000C supports Bluetooth 1.2 / 2.0 (+EDR) / 2.1 (+EDR) / 3.0 / 4.0, Audio Analysis / Protocol Analysis and Low Energy (LE).

Tescom MTP200B WLAN / BT LE Tester

The Tescom MTP200B is a non-signalling test-based WLAN or BT LE (Low Energy) tester.

Agilent N4010A Wireless Connectivity Test Set

Used N4010A from only £6,440

Anritsu MS2687B Spectrum Analyser

Anritsu MT8850A Bluetooth Test Set

Anritsu MT8852A Bluetooth Test Set

Anritsu MT8852B Bluetooth Test Set

Frequency Range: 2.40 GHz to 2.5 GHz

Anritsu MT8855A Bluetooth Test Set

Anritsu MT8860B WLAN Test Set

Anritsu MT8860C WLAN Test Set

Anritsu S331D Cable & Antenna Analyser

The Anritsu S331D Cable & Antenna Analyser has a Frequency Range of 25MHz - 4.0GHz.

Comm-Connect 7007 WLAN Directional Antenna

The Comm-Connect 7007 WLAN Directional Antenna has a Frequency Range of 2-6 GHz.

LitePoint IQ2010 Multicom Test System

The Litepoint IQ2010 Multicom Test System enables testing of connectivity standard: WiFi, Bluetooth, GPS, FM, WiMAX, NFC, ZigBee, and WAVE.

LitePoint IQ2015 Multi-communication Test System

The LitePoint IQ2015 provides the comprehensive, wireless testing support you need to test WLAN, Bluetooth, GLONASS, GPS, NFC, WiMAX, FM, and NFC.

LitePoint IQfact+

LitePoint IQfact+ provides turnkey calibration and verification solutions for key wireless chipsets.

LitePoint IQflex 802.11 a/b/g/n Test Solution

The Litepoint IQflex 802.11 a/b/g/n Test Solution enables testing of connectivity standards: OFDM, MIMO, WLAN and Bluetooth.

LitePoint Iqnfc

The Litepoint IQnfc is an NFC test system that’s optimized for both production lines and labs.

LitePoint IQnfc+

The LitePoint's IQnfc+ is a simple-to-setup and easy-to-use system that allows one-click operation to quickly characterise the NFC physical layer in the production lines.

LitePoint IQnxn MIMO Test System

The Litepoint IQnxn MIMO Test System enables testing of connectivity standards: 802.11n, MIMO, WiFi and WLAN.

LitePoint IQnxnPlus Multi-Stream MIMO Test System

The Litepoint IQnxnPlus Multi-Stream MIMO Test System enables testing of connectivity standards: 802.11n, MIMO, WiFi and WLAN.

LitePoint IQramp Data Analysis

IQramp is a purpose-built data analysis toolset that is designed for test engineering and makes data analysis fast and easy.

LitePoint IQview 802.11 a/b/g/n Test Solution

The Litepoint IQview 802.11 a/b/g/n Test Solution enables testing of connectivity standards including: 802.11a/b/g/n, WLAN and Bluetooth Test.

LitePoint IQxel

The LitePoint IQxel enables testing of connectivity standards including; WiFi, 802.11ac, 802.11a/b/g/j/n/p, Bluetooth.

LitePoint IQxel-MW Multi-DUT Connectivity Test System

The LitePoint IQxel-MW is a comprehensive, multi-device test solution for the next generation of wireless connectivity devices, ideal for both R&D and high-volume production.

LitePoint zScript

LitePoint zScript is a test sequence software designed to make device/component testing fast and simple. zScript allows you to set multiple input sweep parameters and obtain a variety of output results, it runs all the conditions and iterates as necessary to obtain the desired result parameters.

LitePoint zSeries – MIMO

The LitePoint zSeries MIMO is a comprehensive Design Test Solution optimized for bring-up and design verification of MIMO RFIC chipsets used in mobile devices.

LitePoint zSeries – RFIC

The LitePoint zSeries RFIC is a comprehensive Design Test Solution optimized for bring-up and design verification of RFIC chipsets used in mobile devices.

LitePoint zSignal DPD Digital Pre-Distortion Software

LitePoint’s zSignal DPD is a comprehensive digital pre-distortion (DPD) software toolkit for power amplifier (PA) and front-end module (FEM) characterisation and testing.

LitePoint zSignal WLAN Analysis & Waveform Creator Software

LitePoint zSignal WLAN software is a comprehensive IEEE 802.11 demodulation analysis and modulation waveform creator software toolkit for compliance testing and characterisation of WLAN devices.

Rohde & Schwarz CBT Bluetooth Tester

The R&S CBT performs Bluetooth RF tests at extremely high speed.

Rohde & Schwarz CBT32 Bluetooth Tester

The R&S CBT high speed Bluetooth test set provides RF testing on Bluetooth devices in compliance with Bluetooth 1.2 / 2.0 / 2.1 / 3.0 / + HS and 4.0 core specifications.

Rohde & Schwarz CMU200 Radio Communication Tester

Used CMU200 from only £8,626.50

Rohde & Schwarz CMW100 Communications Manufacturing Test Set

The Rohde & Schwarz CMW100 communications manufacturing test set is a new trendsetting product for calibrating and verifying mobile phones with a continuous frequency range up to 6 GHz.

Rohde & Schwarz CMW270 Wireless Connectivity Tester

The CMW270 is an ideal test solution for integrated wireless communications solutions as used in laptops, netbooks, game consoles, data cards, wireless headsets and other IoT devices

Rohde & Schwarz CMW500 Radio Communication Tester

The CMW500 is a compact solution for R&D and Production testing of devices across multiple wireless standards.

Rohde & Schwarz FTS4BT Bluetooth Sniffer v 3.0 + HS

The Rohde & Schwarz FTS4BT Bluetooth Sniffer v 3.0 + HS has a Frequency Range of 2.40 GHz to 2.5 GHz.

RTX2254 Bluetooth Low Energy RF Tester

The RTX2254 RF test platform for Bluetooth Low Energy is an efficient, cost-effective RF tester for testing the typical key parameters of the receive and transmit paths in BLE products.

Tescom MTP200A Wi-Fi BLE Tester

Tescom's MTP200A is a non-signalling test-based Wi-Fi or BLE tester, incorporating both a signal generator and a signal analyser

Viavi (Aeroflex) 4916 Antenna Coupler

The Aeroflex 4916 Antenna Coupler has a Frequency Range of 700 MHz- 2.7 GHz.

Viavi (Aeroflex) 4918 Broadband Antenna Coupler

The Aeroflex 4918 Broadband Antenna Coupler has Frequency of Up to 6 GHz.