About GTEM/TEM Cells/Striplines/Reverberation Chambers
GTEM, DTEM, Striplines and Reverberation Chambers (RCs) are modern EMC test environments in addition to the established methods like semi- or full anechoic rooms and open area test sites. They can be used for emission and immunity testing as required by the IEC / EN 61000-4-20, 21 and other standards.
Com-Power AM-400 Antenna Mast
Height Range: 1 - 4 Meters or 1- 6 Meters
The Com-Power AM-400 and AM-600 are motorised antenna masts designed for EMI testing. Antenna mast Model AM-400 allows antenna height variation from 1 to 4 meters, and Model AM-600 can vary antenna height from 1 to 6 meters.
Com-Power AM-400A Automated Antenna Mast
Height Range: 0.5 - 4 Meters
The Com-Power AM-400A is a fully automated Antenna Mast which can be controlled through the Com-Power AMTTC-300 controller. The mast section is a rugged square fibreglass tube provides excellent stability. It also has capability of manual control via toggle switch on the mast’s motor box.
Com-Power AMTTC-300 Antenna Mast & Turntable Controller
Channels: 3 Independent Channels
The Com-Power AMTTC-300 Antenna Mast / Turntable Controller provides fully automated control of Com-Power Antenna Mast & Turn Table.
P100 Shielding System
P100: EX High Performance RF chamber range: 100db @ 18 GHz
This is the perfect chamber solution when a slightly higher level of shield performance is required above 10 GHz and for lower frequency testing below 100 kHz.
S100 Shielding System
Shielding effectiveness performance + 100db @ 10Ghz
NTD S100 High Performance RF chamber range: Shielding effectiveness performance + 100db @ 10 GHz.
Teseq D-Tem Cell
TEM cell meets ISO 11452-3 and CISPR 25
The transversal electromagnetic mode which can developed in the DTEM cell, provides the opportunity for doing EMC testing inside the cell. In principle, the DTEM cell is a coaxial line expanding rectangularly and with planar septum.
Teseq GTEM 1000 Cell
Emissions and immunity testing in a single, shielded environment
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment.
Teseq GTEM 1250 Cell
Emissions and immunity testing in a single, shielded environment
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment.
Teseq GTEM 1500 Cell
Emissions and immunity testing in a single, shielded environment
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment.
Teseq GTEM 1750 Cell
Emissions and immunity testing in a single, shielded environment
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment. Compared to other test sites, GTEM testing is faster with high accuracy and excellent reproducibility.
Teseq GTEM 2000 Cell
Emissions and immunity testing in a single, shielded environment
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment. Compared to other test sites, GTEM testing is faster with high accuracy and excellent reproducibility.
Teseq GTEM 250 Cell
Emissions and immunity testing in a single, shielded environment
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment.
Teseq GTEM 250A SAE Test Cell
Test cell with special opening to test integrated circuits on approx. 45 mm septum height
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment.
Teseq GTEM 250A-V Test Cell
100 Watts input power, Excellent VSWR up to 18 GHz
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment.
Teseq GTEM 500 Cell
Emissions and immunity testing in a single, shielded environment.
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment.
Teseq GTEM 750 Cell
Emissions and immunity testing in a single, shielded environment
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment.
Teseq GTEM Immunity Test Systems
Complete IEC 61000-4-20 compliant System
AMETEK CTS via its Teseq product range was one of the original licence holders for the manufacture and supply of GTEM cells. Consequently, the Ametek CTS RF EMC team have over 20 years of experience in the design, installation and calibration of GTEM based RF Immunity test systems.
Teseq Model 2XS Reverberation Chamber
Applications in the automotive, military and commercial market
Reverberation Chambers (RCs) are modern EMC test environments in addition to the established methods like semi- or full anechoic rooms, open area test sites or (G)TEM cells.
Teseq Model L Stirrer for Reverberation Chambers
Frequency range up to 18 GHz
Stirrer size L, remote controlled, incl. gear motor for step-wise and continuous rotation, positioning accuracy +/- 0.5°, smallest step 0.1°, motor installed inside chamber, specified up to 600 V/m CW, incl. EMC filter, cables and stirrer control unit with remote interface and driver for C5I software
Teseq Model M Stirrer for Reverberation Chambers
Frequency range up to 18 GHz
Stirrer size M, remote controlled, incl. gear motor for step-wise and continuous rotation, positioning accuracy +/- 0.5°, smallest step 0.1°, motor installed inside chamber, specified up to 600 V/m CW, incl. EMC filter, cables and stirrer control unit with remote interface and driver for C5I software
Pagination
- Page 1 of 2
- Next