Harmonics & Flicker

Harmonics & Flicker

About Harmonics & Flicker

Ametek CTS offers complete harmonics and flicker measurement test systems which compiles with the latest IEC/EN standards, including IEC 61000-3-2 and IEC 61000-3-3. The programmable power generation capability of up to 108 kVA provides more than ample power to cater for a wide range of Equipment Under Test (EUT). In addition to harmonics and flicker testing capability, the AC/DC power source used in the system is capable of testing to a wide range of power quality immunity tests including IEC 61000-4-13.


Keyword Search
category.title

EM Test ACS 500N Series Single Phase AC Voltage Source

Frequency (fund.) 40Hz .. 80Hz

Application ACS 500N3 is a single phase AC source, specifically designed for harmonics and flicker testing. It meets the corresponding specifications as per EN/IEC 61000-3-2 and EN/IEC 61000-3-3 as well as JIS C 61000-3-2.

category.title

EM Test ACS 503N Series 3-Phase AC Voltage Source

Frequency (fund.) 40Hz .. 80Hz

Sophisticated 3-Phase AC sources for harmonics & flicker applications The ACS 503N-series are three-phase AC sources, specifically designed for harmonics and flicker testing.

category.title

EM Test AIF 503N Series

Impedances values as per IEC/EN 61000-3-3 & IEC/EN 61000-3-11

The AIF 503N-series are three-phase flicker impedances with a nominal current from 16A up to 75A per phase offering two different impedance values. Zref is used as the flicker impedance as per IEC/EN 61000-3-3 and specified by IEC 60725.

category.title

EM Test DPA 500N Digital Power Analyser

Real-time data acquisition

DPA 500N - Full-compliant single phase harmonics and flicker analyzer Harmonics and interharmonics are caused by modern electronic power conditioning modules. Such, mostly non-linear, modules to control loads and to reduce power consumption is the source of voltage at unwanted frequencies superposed on the supply voltage.

category.title

EM Test DPA 503N 3-Phase Digital Power Analyser

Real-time data acquisition

DPA 503N - Full-compliant 3-phase harmonics and flicker analyzer Harmonics and interharmonics are caused by modern electronic power conditioning modules. Such, mostly non-linear, modules to control loads and to reduce power consumption is the source of voltage at unwanted frequencies superposed on the supply voltage.

category.title

EM Test NetWave 20 Series Three-Phase Multifunctional AC/DC Power Source

Wide Power Bandwidth; DC - 5 kHz

NetWave - Simulation of the most required power supply phenomenon The NetWave Series (3-phase) are three-phase AC/DC power source, specifically designed to fully meet the requirements as per the standards IEC/EN 61000-4-13, -4-14, -4-28 and in addition to pre compliance testing to -4-27.

category.title

EM Test NetWave 3 Series Programmable Multifunctional AC/DC Power Source

Output Power up to 7,500 VAAC and 9,000 WDC

NetWave - Simulation of the most required power supply phenomenon The NetWave series (1-phase) are single phase AC/DC power sources, specifically designed to meet the requirements as per the standards IEC/EN 61000-4-13, -4-14 and -4-28.

category.title

EM Test NetWave 30 Series Three-Phase Multifunctional AC/DC Power Source

Output Power up to 270 kVA AC / 324 kW DC

NetWave - Simulation of the most required power supply phenomenon The NetWave Series (3-phase) are three-phase AC/DC power source, specifically designed to fully meet the requirements as per the standards IEC/EN 61000-4-13, -4-14, -4-28 and in addition to pre compliance testing to -4-27.

category.title

EM Test NetWave 67 Series Three-Phase Multifunctional AC/DC Power Source

Output Power up to 270 kVA AC/324 kW DC

NetWave - Simulation of the most required power supply phenomenon The NetWave Series (3-phase) are three-phase AC/DC power source, specifically designed to fully meet the requirements as per the standards IEC/EN 61000-4-13, -4-14, -4-28 and in addition to pre compliance testing to -4-27.

category.title

EM Test NetWave 7 Series Programmable Multifunctional AC/DC Power Source

Output Power up to 7,500 VAAC and 9,000 WDC

NetWave - Simulation of the most required power supply phenomenon The NetWave series (1-phase) are single phase AC/DC power sources, specifically designed to meet the requirements as per the standards IEC/EN 61000-4-13, -4-14 and -4-28.

category.title

EM Test NetWave 90 Series Three-Phase Multifunctional AC/DC Power Source

Output Power up to 270 kVA AC/324 kW DC

NetWave - Simulation of the most required power supply phenomenon The NetWave Series (3-phase) are three-phase AC/DC power source, specifically designed to fully meet the requirements as per the standards IEC/EN 61000-4-13, -4-14, -4-28 and in addition to pre compliance testing to -4-27.

Sign up for the MCS Newsletter

You will receive all the latest test & measurement news and rental offers.