About Pre-Amplifiers
RF preamplifiers are widely used to improve system sensitivity and can be especially useful in EMI/EMC radiated emissions test systems. The wide bandwidth antennas typically used for radiated emission measurements often have high transducer factors which can impact the overall measurement sensitivity for the system.
Com-Power PAL-010 Audio & Low Frequency Preamplifier
Frequency Range: 100 Hz - 30 MHz / Gain: 28 dB
The Com-Power PAL-010 has a gain variation of ±2.5 dB for the entire frequency range to reduce measurement errors. It can be powered by the rechargeable NimH batteries included when an external power source is not available.
Com-Power PAM-103 Preamplifier
Frequency Range: 1 MHz - 1 GHz / Gain: 33 dB
The Com-Power PAM-103 Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing.
Com-Power PAM-118A Preamplifier
Frequency Range: 500 MHz - 18 GHz
The Com-Power PAM-118A is a bench-top microwave preamplifier is primarily intended for EMI / EMC applications; however, it may be used for other application which requires low noise and high signal amplification.
Com-Power PAM-6000 Preamplifier
Frequency Range: 1 - 16 GHz / Gain: 30 dB
The Com-Power PAM-6000 Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing.
Com-Power PAM-840A Preamplifier
Frequency Range: 18 - 40 GHz / Gain: 37 dB
The Com-Power PAM-840A is a bench top microwave preamplifier. This preamplifier is primarily intended for EMC applications; however, it may be used for other applications that require low noise and high signal amplification.
Com-Power PAP-501 Preamplifier
Frequency Range: 10 MHz - 1 GHz
The Com-Power PAP-501 preamplifier has a frequency range of 10 MHz to 1 GHz. It is compact in size and is powered by external DC adaptor.