About RF System Components and Accessories
Specially designed system components for EMC testing requirements featuring a large dynamic range, fast measurement devices, rugged design and a frequency range that matches the application. The system components can be purchased as individual parts or as a full configured system defined by the user for frequency and power requirements.
Single Band CBA6G D Series Amplifier
Class A Operation, 100% Mismatch Tolerant with no Foldback
Class A, high power density, design has allowed us to produce a 1.0 GHz to 6 GHz amplifier series with power levels from 30 to 400 watts P1dB. These amplifiers are ideal for RF immunity testing in a GTEM Cell or with a wide range of available horn antenna such as the Teseq BHA range or readily integrated with an NSG 6000 to form part of a broadband RF test system.
Teseq ATN 6 Series Attenuators
60 W / 150 W / 200 W, DC to 1 GHz
6 dB- 50 Ω attenuators, particularly for minimising reflection losses in tests per IEC/EN 61000-4-6 also useful for general purposes.
Teseq BAA 6001 Tube for DPA
Insertion loss: up to 0.8 dB @ 3 GHz
Antenna tube, recommended for RSG 1000 and RSG 3000 mounted on BTP 6020 and CHA 9425A
Teseq BTP 6010 Tripod
Tripod for RSG 1000 and RSG 3000
Tripod for RSG 1000 and RSG 3000. Combined with BAA 6001 and BAA 6010 tripod for DPA 3000 and DPA 4000.
Teseq BTP 6020 EMC Antenna Tripod
Easy height adjustment and transportability
The BTP 6020 collapsible tripod has been designed for indoor radiated emission an immunity testing; using Teseq antennas with 22 mm diameter tube mounts like CBL 6111, 6112, 6141 and 6143.
Teseq CAS BAL4070 Calibration Set
Designed for function tests, verification measurements and / or calibration on BAL 4070
The product CAS BAL4070 is made for function tests, verification measurements and / or calibration on BAL 4070. Measuring parameter is the coupling attenuation S21.
Teseq CBA250M-2500 Amplifier
Class A Operation, Ideal for Low Frequency Tests Using Strip Line Devices
This low frequency amplifier can be used in conjunction with other amplifiers from the Teseq range to cover the entire frequency range from 10 kHz to 40 GHz with convenient frequency break points allowing you to optimise the power level in each range.
Teseq CBA250M-800-002 Amplifier
Designed specifically for conducted EMC testing
Designed specifically for conducted EMC testing, this mismatch tolerant Class A amplifier is ideally suited for automotive test applications.
Teseq CFL 9206A Transient Limiter
Helps to protect spectrum and measuring receivers from damage
The CFL has been designed to interface between a transducer (antenna, line network) and measuring equipment (receiver, spectrum analyzer).
Teseq CIS EMC Laboratory Control Software
Sophisticated, easy to use and fully featured RF EMC software package
Compliance Immunity Software (CIS) is a sophisticated EMC laboratory control software designed to make RF Immunity testing fast, efficient, compliant, accurate and simple. A major feature in CIS is the availability of ‘Installable Applications’.
Teseq CTP 6099 Antenna Tripod
Easy height adjustment and transportability
The CTP 6099 tripod is ideal for outdoor applications and use on soft ground. It has been designed for the loop antenna HLA 6120 and can be used with the optionally available adapters for other antennas
Teseq DCP 0100A Dual Directional Coupler
Dual directional coupler, Wide frequency range, High power handling
This high power dual directional coupler has been specifically designed for EMC immunity applications.
Teseq Isolation Transformer (ITF) 60 dB
Isolation transformer 60 dB, Meets the requirements of IEC/EN 61000-4-16
ITF 6A, ITF 14A, ITF 22, Isolation Transformer 60 dB. The Isolation Transformer (ITF) provides the 60 dB decoupling as required in IEC / EN 61000-4-16.
Teseq KSQ 1000A Spherical Reference Radiation Source
Up to 60 dBuV/m in a 10 m measuring distance
Compact spherical reference radiation source for the transfer of ‘Interference Field Strength’ value, offers very good price-performance relation. The KSQ 1000 is a special version of reference radiation source for the frequency range 30 MHz to 1 GHz.
Teseq LE 4031 Artificial Network
Designed for IEC / EN 61000-4-31, NSG 4031 and CDND M316-16
The LE 4031 provides the RF cables, attenuators, baluns and termination as needed for the level setting procedure in accordance with the standard IEC / EN 61000-4-31.
Teseq LNA 6000 Low Noise Amplifier
Wide band, Low noise figure
The LNA 6000 is a low noise amplifier with 12.5 dB of gain covering the nominal frequency range 1 MHz to 3 GHz and can be used in the range from 200 kHz to 4 GHz.
Teseq LNA 6900 Low Noise Amplifier
Ultra wide band, High gain, Low noise figure
The LNA 6900 is a low noise amplifier with 25 dB of gain covering the nominal frequency range 9 kHz to 2 GHz and can be used up to 4 GHz.
Teseq LNA 6901 Low Noise Amplifier
Wide band, High gain, Low noise figure
The LNA 6901 is a low noise amplifier with typ. 28 dB of gain covering the nominal frequency range 9 kHz to 1 GHz and can be used up to 2 GHz.
Teseq PMR 6003 Power Meter
Frequency range 9 kHz to 3 GHz
EMC immunity testing makes very specific demands on RF power meters. A large dynamic range, fast measurements, rugged design and a frequency range that matches the application are some of the unique requirements for power meters in an EMC test environment.
Teseq PMR 6006
Frequency range 1 MHz to 6 GHz
EMC immunity testing makes very specific demands on RF power meters. A large dynamic range, fast measurements, rugged design and a frequency range that matches the application are some of the unique requirements for power meters in an EMC test environment.
Pagination
- Page 1 of 3
- Next