About Transient Generators (Surge, Burst)
High end combined or single function solutions for simulating Surge and Burst pulses for immunity testing which comply with international, national and manufacturers' standards including IEC/EN 61000-4-4, IEC/EN 61000-4-5, ANSI C62.41 & 45, ANSI TIA 968-B. and ITU-T.K series.
AMETEK CTS CCI Capacitive Coupling Clamp
Active coupling length 1 m
The CCI is used to couple EFT/burst pulses to I/O lines as required in different European and international standards for immunity testing. The coupling of the Electrical Fast Transients EFT/burst to signal lines can usually not be achieved by discrete capacitive coupling without interfering with the signal flow.
AMETEK CTS CCI PVKIT 1 Calibration Kit
Calibration kit for capacitive coupling clamp as per IEC 61000-4-4 Ed.3
The IEC 61000-4-4 Ed 3.0 published 2012 recomends the calibration of the capacitive coupling clamp into a 50ohm coaxial load. The capacitive coupling clamp (CCI) is connected to the 50 ohm output of the EFT generator.
AMETEK CTS PCD 6-DC s-1-1400-400 Manual Coupling/Decoupling Network
Line voltage 1.400 V DC up to 400 A DC
The PCD 6-DC s-1-1400-400 is a manual coupling decoupling network for coupling Surge pulses onto high current DC power lines up to 400 A.
AMETEK CTS PCD 8 b-3-690-1000 Coupling/Decoupling Network
Line voltage 3 * 690 V AC, 1.000 V DC, max. 100/200 A
Coupling/decoupling network for burst pulses on high voltage supply lines up to 3 * 690 V AC, 1.000 V DC, models for 100 and 200 A available. Pulses are coupled in common mode (all lines simultaneously).
AMETEK CTS PCD 8 s-3-690-1000 Series Coupling/Decoupling Network
Surge test voltage up to 8 kV/4 kA
Coupling/decoupling network for surge pulses on high voltage supply lines up to 3 * 690 V AC, 1.000 V DC, models for 100 and 200 A available. Pulses are coupled manually.
AMETEK CTS PCD 8-DC b-1-1500-400 Manual Coupling/Decoupling Network
Line voltage 1.500 V DC up to 400 A DC
The PCD 8-DC b-1-1500-400 is a manual coupling decoupling network for coupling Surge pulses onto high current DC power lines up to 400 A.
AMETEK CTS PVF 1000 1,000 ohm Load Resistor
1,000 ohm load resistor
The pulse shape of EFT/burst generators designed as per IEC 61000-4-4 have to be verified both into a 50 ohm and a 1,000 ohm load at the 50ohm coaxial HV output as well into 50 ohm load at the output of the coupling network where the DUT is connected when testing mains supply lines.
AMETEK CTS PVF 50 50 ohm Load Resistor
50 ohm load resistor
The pulse shape of EFT/burst generators designed as per IEC 61000-4-4 have to be verified both into a 50 ohm and a 1,000 ohm load at the 50ohm coaxial HV output as well into 50 ohm load at the output of the coupling network where the DUT is connected when testing mains supply lines.
AMETEK CTS PVF BKIT 1 Calibration Kit
Calibration kit as per IEC 61000-4-4
The pulse shape of EFT/burst generators designed as per IEC 61000-4-4 have to be verified both into a 50 ohm and a 1,000 ohm load at the 50ohm coaxial HV output as well into 50 ohm load at the output of the coupling network where the DUT is connected when testing mains supply lines.
EM Test Burst NX8 Series Electrical Fast Transient Generator
8,000 Burst voltage
The burst NX8 is the state-of-the-art EFT/Burst tester with a built-in coupling/decoupling network for single phase orthree-phase mains supply lines and a HV terminal to connect a capacitive coupling clamp. The spike frequency can be varied from as low as 100Hz to 1,000kHz. The burst NX8 is capable to generate up to 1,000spikes per second.
EM Test CA EFT Calibration Kit
Calibration kit as per IEC 61000-4-4
The pulse shape of EFT/burst generators designed as per IEC 61000-4-4 have to be verified both into a 50ohm and a 1,000ohm load at the 50ohm coaxial HV output as well into 50ohm load at the output of the coupling network where the DUT is connected when testing mains supply lines.
EM Test CA OCS F Calibration Kit
Calibration kit as per IEC 61000-4-18
The pulse shape of fast damped oscillatory generator designed as per IEC 61000-4-18 have to be verified both into a 0.1ohm and a 1,000ohm load at the 50ohm coaxial HV output as well into 0.1ohm load at the output of the coupling network.
EM Test CNI 508N2 Coupling Network
Coupling to unshielded and shielded lines with up to 4 pairs
Coupling/decoupling assembly for unshielded and shielded high-speed communication lines The CNI 508N2 from AMETEK CTS is the first coupling/decoupling network available on the market to couple Surge onto shielded and unshielded high-speed communication lines with data rates up to 1,000MBit/s.
EM Test Compact NX5 Series Multifunctional Test Generator
Burst 5.5 kV, Surge 5.0 kV and Power Fail
Compact NX5 - Compact Tester for EFT/Burst, Surge and PowerFail The compact Next Generation NX5 is the most versatile tester to address transient and power fail requirements for both international and commercial standards.
EM Test Coupling NX5 Series Coupling/Decoupling Networks
Automatic Coupler for Burst and Surge
Coupling/decoupling networks for EFT/burst and Surge The three-phase coupling/decoupling networks of the coupling NX series are used to couple EFT/Burst pulses and Surge pulses on DC-lines or to three-phase (4-wire or 5-wire) mains supply systems for voltages up to 1,000 VDC / 3 x 690 VAC.
EM Test CSS 500N2 Series 8/20US Current Surge Generator
Surge current 8/20us up to 1,200A
CSS 500N2 is an intelligent solution offering exactly what you need for full-compliant immunity tests against transient current surge phenomena with the wave shape of 8/20 us. The distinct operation features, convenient DUT connection facilities, a clearly arranged menu structure and display philosophy as well as the pre-programmed standard test routines make testing easy, reliable and safe.
EM Test DCD Family Coupling/Decoupling Network
Test voltage up to 7 kV
DCD sr / st - series - coupling/decoupling networks for signal/data lines and networks for unshielded communications lines
EM Test HSC 4-8 Coupling/Decoupling Assembly
Coupling to unshielded and shielded lines with up to 4 pairs
Coupling/decoupling assembly for unshielded and shielded high-speed communication lines The HSC 4-8 from AMETEK CTS is the first coupling/decoupling network available on the market to couple Surge onto shielded and unshielded high-speed communication lines with data rates up to 1,000MBit/s.
EM Test PCN 7-R s-1 Phase Coupling Network
Max impulse voltage: 7 kV
PCN 7-R s-1 - 1-phase coupling network for manual coupling with an impedance of 42 Ω, 0.5 uF according EN 50121 standards. The decoupling network of the generator is used for decoupling the impulse.
EM Test TSS 500N10 Series 10 kV Telecom Surge Generator
Test voltage up to 10 kV
TSS 500N10 - 10 kV Telecom Surge generator for 10/700 us test pulse Telecommunication networks are exposed to lightning events. Therefore telecommunication equipment being connected to the outside world need to have appropriate protection to show an acceptable immunity to surge transients in order not to fail in case of lightning events.
Pagination
- Page 1 of 2
- Next