Attenuators
Vaunix RF/microwave portable & programmable digital attenuators. Includes 50 & 75 ohm bi-directional step attenuators up to 20 GHz.
Attenuators
An attenuator is an electronic device that reduces the power of a signal without appreciably distorting its waveform. An attenuator is effectively the opposite of an amplifier, though the two work by different methods. An RF switch or microwave switch is a device to route high frequency signals through transmission paths.
HYTEM Attenuation Matrix
Frequency Range: 600 MHz - 6 GHz
Attenuation matrixes allow to send one or multiple signals to one or multiple outputs, while changing power level of each signal individually.
HYTEM Attenuator Bank Link Separation
2 Channels, LTE Band 7 Air Interface Simulator
The HYTEM Link Separation system allow to attenuate separately UpLink and DownLink.
HYTEM Attenuator Bank MIMO Systems
Frequency Range: 2,000 - 3,800 MHz
MIMO systems integrate power splitters and couplers which are necessary for correct signal routing.
HYTEM Attenuator Bank Standard Systems
Frequency Range from: 380 MHz - 30 GHz
Standard systems integrate programmable attenuators, which are directly connected from input to output. These systems do not not include additional components.
HYTEM Electronically Controlled Variable Attenuators
Frequency Range from 80 MHz - 30 GHz
HYTEM offers a range of electronically controlled variable attenuators with a frequency range up to 30 GHz.
HYTEM Fixed Attenuator DC - 1,000 MHz
Frequency Range from DC - 1,000 MHz
The HYTEM Fixed Attenuator is used to decrease a RF signal power, in particular as a protection of equipment (receiver, T&M, etc).
HYTEM Fixed Attenuator DC - 26,000 MHz
Frequency Range from DC - 26,000 MHz
The HYTEM Fixed Attenuator is used to decrease a RF signal power, in particular as a protection of equipment (receiver, T&M, etc).
HYTEM Fixed Attenuators DC - 18,000 MHz
Frequency Range from DC - 18,000 MHz
The HYTEM Fixed Attenuators is used to decrease a RF signal power, in particular as a protection of equipment (receiver, T&M, etc).
HYTEM Fixed Attenuators DC - 3,000 MHz
Frequency Range from DC - 3,000 MHz
The HYTEM Fixed Attenuator is used to decrease a RF signal power, in particular as a protection of equipment (receiver, T&M, etc).
HYTEM Fixed Attenuators DC - 4,000 MHz
Frequency Range from DC - 4,000 MHz
The HYTEM Fixed Attenuator is used to decrease a RF signal power, in particular as a protection of equipment (receiver, T&M, etc).
HYTEM Fixed Attenuators DC - 6000 MHz
Frequency Range from DC - 6,000 MHz
The HYTEM Fixed Attenuator is used to decrease a RF signal power, in particular as a protection of equipment (receiver, T&M, etc).
Vaunix LDA Attenuators Series
Frequency Range: Configurations Available up to 20 GHz
Vaunix Lab Brick LDA series RF/microwave portable and programmable digital attenuators include several 50 Ohm and 75 Ohm bi-directional step attenuators with calibrated operation in bands up to 20 GHz.