HYTEM Fixed Attenuators DC - 6000 MHz
Frequency Range from DC - 6,000 MHz
The HYTEM Fixed Attenuator is used to decrease a RF signal power, in particular as a protection of equipment (receiver, T&M, etc). For instance, they can be used with attenuation subracks/ handover simulators which input power is limited to +24 dBm (about 250 mW).
E-NodeB, RRH, BTS generate much higher RF power (50 to 100W, ie 47 to 50 dBm), it is therefore mandatory to use RF attenuator with 30dB minimum attenuation (50 dBm – 24 dBm = 26 dB)
Model
Frequency
Attenuation
Max Input Power
Connectors
HYTEM Fixed Attenuators DC - 6000 MHz Resources
Datasheets
Related products
-
Find out more about Vaunix LDA Attenuators SeriesVaunix LDA Attenuators Series
Vaunix Lab Brick RF/microwave portable and programmable digital attenuators with calibrated operation in bands up to 20 GHz.
-
Find out more about HYTEM Attenuator Bank Standard Systems
HYTEM Attenuator Bank Standard Systems
Standard systems integrate programmable attenuators, which are directly connected from input to output.
-
Find out more about HYTEM Attenuator Bank MIMO Systems
HYTEM Attenuator Bank MIMO Systems
MIMO systems integrate power splitters and couplers which are necessary for correct signal routing.
-
Find out more about HYTEM Attenuator Bank Link Separation
HYTEM Attenuator Bank Link Separation
The HYTEM Link Separation system allow to attenuate separately UpLink and DownLink.
-
Find out more about HYTEM Electronically Controlled Variable Attenuators
HYTEM Electronically Controlled Variable Attenuators
HYTEM offers a range of electronically controlled variable attenuators with a frequency range up to 30 GHz.
-
Find out more about HYTEM Fixed Attenuator DC - 1,000 MHz
HYTEM Fixed Attenuator DC - 1,000 MHz
The HYTEM Fixed Attenuator is used to decrease a RF signal power, in particular as a protection of equipment (receiver, T&M, etc).
-
Find out more about HYTEM Fixed Attenuators DC - 3,000 MHz
HYTEM Fixed Attenuators DC - 3,000 MHz
The HYTEM Fixed Attenuator is used to decrease a RF signal power, in particular as a protection of equipment (receiver, T&M, etc).
-
Find out more about HYTEM Fixed Attenuators DC - 4,000 MHz
HYTEM Fixed Attenuators DC - 4,000 MHz
The HYTEM Fixed Attenuator is used to decrease a RF signal power, in particular as a protection of equipment (receiver, T&M, etc).
-
Find out more about HYTEM Fixed Attenuator DC - 26,000 MHz
HYTEM Fixed Attenuator DC - 26,000 MHz
The HYTEM Fixed Attenuator is used to decrease a RF signal power, in particular as a protection of equipment (receiver, T&M, etc).
-
Find out more about HYTEM Fixed Attenuators DC - 18,000 MHz
HYTEM Fixed Attenuators DC - 18,000 MHz
The HYTEM Fixed Attenuator is used to decrease a RF signal power, in particular as a protection of equipment (receiver, T&M, etc).
-
Find out more about HYTEM Attenuation Matrix
HYTEM Attenuation Matrix
Attenuation matrixes allow to send one or multiple signals to one or multiple outputs, while changing power level of each signal individually.
