Tescom MTP200B WLAN / BT LE Tester

  • Manufacturer: Tescom
  • SKU: MTP200B

No longer available for purchase, please see our range of Wireless Test Sets Here.

Tescom’s MTP200B is a non-signalling test-based WLAN or BT LE (Low Energy) tester. As one-body equipment incorporating both Signal Generator and Signal Analyser, MTP200B is designed to provide effective and stable performance for generating and analysing WLAN and BT LE waveforms. It can be effectively used in a mass production for testing the RF performance of products with WLAN and BT LE functions such as smart phones. In addition, the best efficiency can be expected at a lower cost thanks to the simple installation and operation of the product.

Tescom MTP200B WLAN / BT LE Tester Product Description

WLAN Test System

MTP200B’s WLAN Test System provides both Analyser (ANL) mode and Generator (GEN) mode; WLAN IEEE 802.11 a/g/n standard is supported.

WLAN Analyser

For signals transmitted by WLAN devices, measurements of RMS EVM, Power, Frequency Error, and Clock Error can be made through MTP200B’s Signal Analyser; the results of the measurements can be readily checked through the built-in LCD without separate connection to PC.

WLAN Generator

MTP200B’s Signal Generator can transmit a user-defined WLAN signal to DUT so that the DUT can check its reception performance by checking whether the transmitted signal by MTP200B is successfully received. MTP200B can store up to 40 different user-defined WLAN signals, and the stored information can be readily checked through UI.

Waveform Creator

Using Tescom Waveform Creator, user can create various WLAN test files by directly editing the parameters related to WLAN 802.11 a/g/n protocol. In addition, the created WLAN test files can be easily downloaded to the equipment.

BT LE Test System

MTP200B’s BT LE Test system provides a non-signalling-based test for BT LE RF test cases defined by BT LE test standard. In addition, since advertising test mode is supported, it is possible to check the simple RF characteristics of BT LE devices in finished product condition with no separate test mode. BT LE Direct test is also available in MTP200B by using a remote control program. MTP200B can be simply applied to mass production because the remote control program not only supports the automatic batch measurements for RF test case but also provides pass/fail judgements for the measurement results.

BT LE Analyser

With MTP200B’s BT LE Signal Analyser, Output power, Modulation characteristics, Carrier frequency offset, and drift as defined in the BT LE Transmitter Test Case can be measured by analysing the signals transmitted by a BT LE devices. Additionally, a function with which Power, Modulation, and Initial carrier frequency offset can be simultaneously tested is provided in advertising mode, making it possible to determine easily whether or not the RF performance of a device can meet the test standard.

BT LE Generator

MTP200B’s Signal Generator can create and transmit BT LE signal defined in BT LE test standard to DUT so that the DUT can check its reception performance by checking whether the transmitted signal by MTP200B is successfully received.

Remote Control Interface

With MTP200B’s built-in USB to Serial interface, it is possible to control equipment remotely using a USB port in a PC. MTP200B also supports the GPIB interface for remote control. Using the remote commands that provided with the equipment, all functions of the equipment can be operated and user can make an automation program for mass production.

WLAN & BT LE Remote Control Program

The measurement can be done more conveniently and easily if a WLAN/BT LE remote control program is used.

  • Carry out automatic measurement of Bluetooth LE RF Test Cases all at once
  • Chip Vendors test Control Software included
  • Easy to change measurement criteria and conditions.
  • Display test results and save test results as an Excel file

Firmware Upgrade

For MTP200B, firmware upgrade can be done quickly and easily through PC using a simple upgrade program.

Provide a total solution necessary for production lines

Tescom can provide a total solution for production that ranges from the shield box designed for electromagnetic wave shielding, TEM CELL for wireless test and antenna couplers to measurement software programs for production automation to help solving the difficulties involving measurement systems that are complicated and difficult to operate.

Tescom MTP200B WLAN / BT LE Tester Resources

Sign up for the MCS Newsletter

You will receive all the latest test & measurement news and rental offers.